|Group||APC punching machine|
|Min. Order||1 piece|
|Terms of Payment||all|
|Stroke per minute(spm)||25-45/35-75 spm|
|Stroke (mm)||250/150 mm|
|Die height||500/550 mm|
|Double solenoid valve||MAC|
About APC precision punching machine :
1. The machine body was welded of quality steel sheet andtreated by tension elimination. This improve stability and reliability forpower press.
2. In order to guarantee the machine running in stable andsmooth, adopts the design of symmetrical two slid boards with balancer .
3. The precision of mold adjusting up to 0.1mm, safety,reliable and convenient.
4. Crank, Gear, Connect bar are oxidized hardening andmilled, having super comprehensive mechanical performance and durable function.
5. Reasonable structural design, is convenient for automaticproduction and line production.
6. Used reliable high intensity clutch / brake and twinelectromagnetic valve,overloading protector an guarantee safe productionall-around.
7.Used high-grade alloy steel ,doublecrank, wide work center with connection bar structure, the optimized design issuitable for large sixes and the mold. bearing large impact loading as well aspressing of eccentric mold.
8.Adopted closed electric, havecompatible with any automatic equipments.
High rigidity, low integrated clearance, small changing in mold height,
small deviation of dynanmic center, the mold life in large scale, small transfiguration for press
High precision processing, high efficiency operation, machine to ensure products of high quality
Facilitate the operation of implementation, fixed locking type six-surface guide way, cutting low-noise, safe and reliable operating state
Technology Informations & Specification
|High performance dry clutch & brake||Die cushion|
|Electronic crank angle led display||Electrical automatic lubrication system|
|Electronic speed led display||Safety light curta in|
|Off/inching/safety/one stroke/continuous||Slide knock-out device|
|Hydraulic overload protector||Main motor reversing circuit|
|Main motor (adjustable)||Foot switch|
|Overrun detector||Safety die block with plug|
|Portable2-hand push||Dual solenoid value with|
|Dual solenoid valve||Missfeed detector|
|Automatic slide adjust||Quick mold replace mechanism|
|Digital die height indication (unit0.1mm)||Quick die change system|
|Manual lubrication system||Upper die clamper|
|Total counter ,6 digits||Die lifter|
|Preset counter , 6 digits||Die arm|
|Maintenance counter , 6 digits||Automatic feed equipment|
|Life counter, 6 digits||NC straightener feed c/w uncoiler (3 in 1)|
|Electronic rotary cam switch (6 spare channel)||NC roller feeder|
|Air ejector 1/2”one channel||Straightener c/w uncoiler (2 in 1)|
|Air source receptacle 1/2”two channel||Straightener|
|Missfeed detection circuit|
|Power receptacle (available only for single phase 110V power source siring by used )|
Key components list with brand
|No.||Key Components List||Brand|
|7||Air switch and external parts||Fuji,Japan|
|8||Switching power supply||Fuji,Japan|
|10||Hydraulic overloading protection device||Kingair,Taiwan|
|11||Manual slide adjustment device||Kingair,Taiwan|
|12||Electric slide adjustment device||MAC,America|
|13||Main motor(speed adjustable)||Kingair/TECO|
|14||Mechanical die height indicator||Jinsong|
|15||Electric die height indicator||Jingsong|
|16||Slide and mould balancing device||Kingair|
|17||Crank Angle Indicator||Kingair|
|19||Air source Receptacle||Fuji,Japan|
|20||Over-run Safety Device||Fuji,Japan|
|21||Jet air device||Kingair,Taiwan|
|23||Pressure regulating valve||SMC,Japan|
|25||Manual grease pump||Ishan,Taiwan|
|30||A set of assitant tools||WIGA,Taiwan|
Hong-Er Online Contact Way:
tel: 0086 755 28372363
fax: 0086 755 28372353
The press machine are widely used for manufacturing in the industries of aviation & aerospace,ship & vehicles,electroinc appliance,instruments and meters, medical facilities,hardward etc.
The below are our customers's products pictures:
What Is The Warranty Services For The Machine？
All of Honger machine，such as high speed press machine, Feeder machine, uncoiler, decoiler, pressing machine will follow the list
warranty services. Warranty: One year of warranty service will be provided from the date the machine is delivered. For damage to
machine occurred in handling and failure not resulting from misuse during the warranty period, we will provide replacement of parts
and repair without charge.
The following failures are not covered by our warranty service:
A、Damage to parts due to operating machine in a voltage-changing environment without voltage regulator;
B、Failure resulting from unauthorized modification or handling;
C、Purchasing from agency or other manufacturer instead of us.
D、Failure caused by improper self-repair without instructions of our technician.
E、Damage resulting from natural disasters and circumstance beyond control.
F、Electrical parts and wearing parts are without warranties.
Would you provide OEM/ODM service ?
1.We are providing OEM services for our competitors from European country and Janpan company.
2.Hong-Er Machine is a professional factory of high speed press machine, Automatic feeder machine, uncoiler machine/decoiler machine, straightener machine, decoielr straightener feeder, pressing machine etc.