Shenzhen Honger Machine Equipment Co.,Ltd
Q
How to operate the coil car and decoiler in 3 in 1 NC servo feeder?
A

How to operate the coil car and decoiler in 3 in 1 NC servo feeder?


1.Push the button coil car forward and backward. Load the coil on the coil car.operate the decoiler mandrel to collapse the smallest.


2.Push the button coil car lifts the coil up until the core of the coil is the line of the decoiler mandrel, and operate the coil car move to the coil to the decoiler mandrel.


3.Push the button decoiler expansion, the decoiler expand the coil.


Note: In the coil loading, the coil car must lift the coil up until the core of the coil is the line of the decoiler mandrel. The

decoiler mandrel must collapse the smallest before handling the coil. Otherwise, the coil will be damaged. The decoiler must be

full expansion before decoiling.


Make sure everything is ok, let the coil car move back, that is all for the coil installation

Previous:How to use the automatic decoiler to feed material?

Next:Decoiler Straightener Feeder 3 In 1 Machine Failure & Solution Way: